The development of hydraulically - powered, static-load sheet pile pressing equipment in response to severe constructional and environmental problems in high-density inner city areas of Japan provides a very quiet method entirely free from vibration.
Since we introduced the Kowan Still Worker into Europe in 1990, we have successfully completed over 750 contracts in Germany, France, Benelux, Switzerland, Denmark, Italy and throughout the UK.
Features/benefits
No noise or vibration allows piling in built-up areas and in close proximity to existing services. The WP-150P and WP-150PIII can install 800mm 0/D, 900mm 0/D and 1000mm 0/D interlocking tubular piles. The WP-150PII can install 600mm 0/D and
700mm 0/D interlocking tubular piles. Up to 150 ton pressing capacity Self travelling means only a small crane is required for pitching and it can work in low headroom areas. Radio controlled and no piling gates required means a productive safe working environment. Unique Tilting Device allows piling up or down a gradient. Turns corners and curves Cost effective alternative to concrete retaining walls i.e. contiguous and diaphragm walls.
Still Worker WP-150P
Still Worker WP-150PII
Still Worker WP-150PIII
Turning a corner with the Still Worker WP-150P
WP-150P
WP-150PII
WP-150PIII
a
1,030mm
930mm
950mm
b
2,550mm
2,500mm
2,550mm
c
1,000mm
900mm
1,050mm
d
2,550mm
2,500mm
-
e
3,700mm
3,700mm
-
Technical Data
Model
WP-150P and WP150PII
WP-150PIII
Moving System
Self-moving
Self-moving
Pressing-in ForceXX
900 KN
1,100 KN
Drawing-out Force
1.000 KN
1,200 KN
Pressing-in Speed
3.4 - 38.0 m/min.
2.5 - 28.0 m/min.
Drawing-out Speed
3.0 - 30.0 m/min..
2.3 - 22.0 m/min..
Stroke
800mm
800mm
Operation System
Wireless radio-control &
Cabled remote-control
Wireless radio-control &
Cabled remote-control
Tilting Device
±5 degrees
±5 degrees
Mast Rotation
180 degrees
180 degrees
Applicable sheet piles
ø1000, ø900, ø800mm
PP, LT, PT
ø700, ø600mm
PP, LT, PT
Weight
16,400 kg 16,350 kg
15,000 kg
Hydraulic Power Unit
(Standard Accessory)
TE -200
Power
Diesel Engine
4-Cycle, Water-Cooled
Direct Injection, Turbo